Bartec Legend Plate for Use with Bartec Push Buttons

Nº de Estoque RS: 244-3651Marca: BartecPart Number: 05-0044-0001
brand-logo
View all in Push Button Labels & Legends

Documentos Técnicos

Especificações

Brand

Bartec

Accessory Type

Legend Plate

For Use With

Bartec Push Buttons

País de Origem

Germany

Detalhes do produto

Label Holder

Hazardous Area Actuators & Contact Blocks

Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 90,86

Each (Sem VAT)

Bartec Legend Plate for Use with Bartec Push Buttons

R$ 90,86

Each (Sem VAT)

Bartec Legend Plate for Use with Bartec Push Buttons
Informações de estoque temporariamente indisponíveis.

Comprar em grandes quantidades

QuantidadePreço unitário
1 - 4R$ 90,86
5 - 9R$ 89,84
10+R$ 86,51

Documentos Técnicos

Especificações

Brand

Bartec

Accessory Type

Legend Plate

For Use With

Bartec Push Buttons

País de Origem

Germany

Detalhes do produto

Label Holder

Hazardous Area Actuators & Contact Blocks

Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.