Megger MFT1721 Multifunction Tester, 100V , Earth Resistance Measurement With Wireless UKAS Calibration
Documentos Técnicos
Especificações
Brand
MeggerLoop Impedance Test Type
2 Wire, 3 Wire
Calibrated
UKAS
Automatic RCD Test
Yes
Model Number p
MFT1721
RCD Ramp Test
Yes
Non-Tripping
Yes
Insulation Test Voltage
100 V, 250 V, 500 V, 1000V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
Yes
Interface Type
Wireless
Continuity Test Current
200mA
RCD Test Type
A, AC, B, S
IP Rating
IP54
Test Standards
EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
Power Source
Battery
Width
235mm
Length
85mm
Dimensions
85 x 235 x 150mm
Minimum Continuity Resistance
0.01Ω
Continuity Range
0.01 → 99.9 kΩ
Minimum Operating Temperature
-10°C
Height
150mm
Operating Temperature Range
-10 → +55 °C
Weight
1 (with Battery; Excluding Case)kg
Safety Category Level
CAT III, CAT IV
Plug Type
BS 1363, LT 300-EN-BS
Maximum Continuity Resistance
99.9kΩ
Safety Category Voltage
300 V, 600 V
Voltage Measurement Range
10 → 600V
Battery Type
AA Alkaline
Safety Category
CAT III 600 V, CAT IV 300 V
Display Type
LCD
Maximum Operating Temperature
+55°C
País de Origem
United Kingdom
Detalhes do produto
Megger MFT1721 Multifunction Tester
The MFT1721 is part of the MFT1701 series from Megger whcih tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial, and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The MFT1721 includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited, and a warning beep sounds.
Supplied with
MFT1721 - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 46.544,86
Each (Sem VAT)
1
R$ 46.544,86
Each (Sem VAT)
1
Documentos Técnicos
Especificações
Brand
MeggerLoop Impedance Test Type
2 Wire, 3 Wire
Calibrated
UKAS
Automatic RCD Test
Yes
Model Number p
MFT1721
RCD Ramp Test
Yes
Non-Tripping
Yes
Insulation Test Voltage
100 V, 250 V, 500 V, 1000V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
Yes
Interface Type
Wireless
Continuity Test Current
200mA
RCD Test Type
A, AC, B, S
IP Rating
IP54
Test Standards
EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
Power Source
Battery
Width
235mm
Length
85mm
Dimensions
85 x 235 x 150mm
Minimum Continuity Resistance
0.01Ω
Continuity Range
0.01 → 99.9 kΩ
Minimum Operating Temperature
-10°C
Height
150mm
Operating Temperature Range
-10 → +55 °C
Weight
1 (with Battery; Excluding Case)kg
Safety Category Level
CAT III, CAT IV
Plug Type
BS 1363, LT 300-EN-BS
Maximum Continuity Resistance
99.9kΩ
Safety Category Voltage
300 V, 600 V
Voltage Measurement Range
10 → 600V
Battery Type
AA Alkaline
Safety Category
CAT III 600 V, CAT IV 300 V
Display Type
LCD
Maximum Operating Temperature
+55°C
País de Origem
United Kingdom
Detalhes do produto
Megger MFT1721 Multifunction Tester
The MFT1721 is part of the MFT1701 series from Megger whcih tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial, and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The MFT1721 includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited, and a warning beep sounds.
Supplied with
MFT1721 - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case