Microchip Trace Connector Connector ATAVR-MICTOR38

Nº de Estoque RS: 130-6130Marca: MicrochipPart Number: ATAVR-MICTOR38
brand-logo
View all in Microcontroller Development Tools

Documentos Técnicos

Especificações

Brand

Microchip

Classification

Connector

Technology

Trace Connector

Detalhes do produto

Mictor 38 Trace Connector

The Mictor 38 trace connector is ideal for connecting the AVR ONE! probe connector to your Atmel development board. The connector is used primarily for the high-speed trace capture of up to 16-bits of trace data and status/sync signals but can also be used to connect to debug signals.

Note: The through-hole pins on the central earthing strip should be soldered directly to the ground plane of your development board.

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 486,50

Each (Sem VAT)

Microchip Trace Connector Connector ATAVR-MICTOR38

1

Disponível em múltiplos de 1
1R$ 486,50
2R$ 973,00
3R$ 1.459,50
4R$ 1.946,00
5R$ 2.432,50
6R$ 2.919,00
7R$ 3.405,50
8R$ 3.892,00
9R$ 4.378,50
10R$ 4.865,00
11R$ 5.351,50
12R$ 5.838,00
13R$ 6.324,50
14R$ 6.811,00
15R$ 7.297,50

R$ 486,50

Each (Sem VAT)

Microchip Trace Connector Connector ATAVR-MICTOR38
Informações de estoque temporariamente indisponíveis.

1

Disponível em múltiplos de 1
1R$ 486,50
2R$ 973,00
3R$ 1.459,50
4R$ 1.946,00
5R$ 2.432,50
6R$ 2.919,00
7R$ 3.405,50
8R$ 3.892,00
9R$ 4.378,50
10R$ 4.865,00
11R$ 5.351,50
12R$ 5.838,00
13R$ 6.324,50
14R$ 6.811,00
15R$ 7.297,50

Documentos Técnicos

Especificações

Brand

Microchip

Classification

Connector

Technology

Trace Connector

Detalhes do produto

Mictor 38 Trace Connector

The Mictor 38 trace connector is ideal for connecting the AVR ONE! probe connector to your Atmel development board. The connector is used primarily for the high-speed trace capture of up to 16-bits of trace data and status/sync signals but can also be used to connect to debug signals.

Note: The through-hole pins on the central earthing strip should be soldered directly to the ground plane of your development board.