MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960

Nº de Estoque RS: 136-0780Marca: MikroElektronikaPart Number: MIKROE-2040
brand-logo
View all in LED Development Tools

Documentos Técnicos

Especificações

Kit Classification

mikroBus Click Board

Featured Device

APDS-9960

Kit Name

Button G

Detalhes do produto

Button G Click & Button R Click mikroBUS™

Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.

136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED

Click mikroBUS™ Human-Machine Interface Boards

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 197,28

Each (Sem VAT)

MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960

R$ 197,28

Each (Sem VAT)

MikroElektronika MIKROE-2040, Button G mikroBus Click Board for APDS-9960
Informações de estoque temporariamente indisponíveis.

Documentos Técnicos

Especificações

Kit Classification

mikroBus Click Board

Featured Device

APDS-9960

Kit Name

Button G

Detalhes do produto

Button G Click & Button R Click mikroBUS™

Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.

136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED

Click mikroBUS™ Human-Machine Interface Boards