Crouzet Solid State Relay, 25 A Load, 530 V rms Load, 32 V Control
Documentos Técnicos
Especificações
Brand
CrouzetMaximum Load Current
25 A
Maximum Load Voltage
530 V rms
Minimum Control Voltage
4 V
Maximum Control Voltage
32 V
Control Voltage Range
4 → 32 V dc
Minimum Load Current
100 mA
Output Device
SCR
Load Voltage Range
48 → 530 V ac
Dimensions
103.89 x 79.74 x 35.43mm
Length
101.28mm
Operating Temperature Range
-40 → +80°C
Height
35.43mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+80°C
Depth
79.74mm
País de Origem
Mexico
Detalhes do produto
GN0 Series Three Phase Motor Reversing Relay - DC Input
The GN0 solid-state relay is designed to reverse the direction of a motor by switching two of the three phases. Two legs of the three-phase network are wired to the output of the GN0, with the third leg being tied to the motor either directly or through a separate solid-state relay. When the control signal is applied to the input's forward (“F”) terminals, the output SCR's switch power to the motor. When the control signal is applied to the input's reverse (“R”) terminals, the two legs of the output are reversed. If the control signal is applied to both the forward and reverse terminals simultaneously, the outputs of the relay shut off.
Approvals
UL, CSA, TUV
Instantaneous Switching
P.O.A.
1
P.O.A.
1
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
Documentos Técnicos
Especificações
Brand
CrouzetMaximum Load Current
25 A
Maximum Load Voltage
530 V rms
Minimum Control Voltage
4 V
Maximum Control Voltage
32 V
Control Voltage Range
4 → 32 V dc
Minimum Load Current
100 mA
Output Device
SCR
Load Voltage Range
48 → 530 V ac
Dimensions
103.89 x 79.74 x 35.43mm
Length
101.28mm
Operating Temperature Range
-40 → +80°C
Height
35.43mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+80°C
Depth
79.74mm
País de Origem
Mexico
Detalhes do produto
GN0 Series Three Phase Motor Reversing Relay - DC Input
The GN0 solid-state relay is designed to reverse the direction of a motor by switching two of the three phases. Two legs of the three-phase network are wired to the output of the GN0, with the third leg being tied to the motor either directly or through a separate solid-state relay. When the control signal is applied to the input's forward (“F”) terminals, the output SCR's switch power to the motor. When the control signal is applied to the input's reverse (“R”) terminals, the two legs of the output are reversed. If the control signal is applied to both the forward and reverse terminals simultaneously, the outputs of the relay shut off.
Approvals
UL, CSA, TUV
Instantaneous Switching