Documentos Técnicos
Especificações
Number of Levels
Single
Colour
Grey
Overall Length
19,7 palců
Termination Method
Screw
Current Rating
30A
Voltage Rating
500 V
Dimensions
8 (Dia) x 10.5mm
Brand
Phoenix ContactSeries
UT 2.5-QUATTRO
País de Origem
Germany
Detalhes do produto
RN-131 802.11b/g Wi-Fi Evaluation Kit
The RN-131-EK is a Wi-Fi evaluation kit for the RN131 module that can be used to quickly add Wi-Fi connectivity to embedded applications. It has the flexibility to connect directly to a PC via a standard USB interface or to embedded processors through the TTL/UART interface. The board also includes two convenient push buttons for controlling both SoftAP and WPS (Wi-Fi Protected Setup) mode without software configuration. The status LEDs and jumpers enable rapid prototyping and integration into existing systems. The RN131 module is programmed and controlled from a console with a simple ASCII command language. Once the configuration is set up, the module can automatically scan to find an access point, associate, authenticate, and connect over any Wi-Fi network. Additionally, the module can automatically wake up, send data to a remote host and then go back to a low-power sleep state.
Supplied with
USB cable
WLAN (Wireless Local Area Network) - Microchip Technology
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 43,80
Each (In a Pack of 5) (Sem VAT)
5
R$ 43,80
Each (In a Pack of 5) (Sem VAT)
5
Comprar em grandes quantidades
Quantidade | Preço unitário | Per Pacote |
---|---|---|
5 - 25 | R$ 43,80 | R$ 219,00 |
30 - 55 | R$ 42,26 | R$ 211,30 |
60+ | R$ 40,96 | R$ 204,80 |
Documentos Técnicos
Especificações
Number of Levels
Single
Colour
Grey
Overall Length
19,7 palců
Termination Method
Screw
Current Rating
30A
Voltage Rating
500 V
Dimensions
8 (Dia) x 10.5mm
Brand
Phoenix ContactSeries
UT 2.5-QUATTRO
País de Origem
Germany
Detalhes do produto
RN-131 802.11b/g Wi-Fi Evaluation Kit
The RN-131-EK is a Wi-Fi evaluation kit for the RN131 module that can be used to quickly add Wi-Fi connectivity to embedded applications. It has the flexibility to connect directly to a PC via a standard USB interface or to embedded processors through the TTL/UART interface. The board also includes two convenient push buttons for controlling both SoftAP and WPS (Wi-Fi Protected Setup) mode without software configuration. The status LEDs and jumpers enable rapid prototyping and integration into existing systems. The RN131 module is programmed and controlled from a console with a simple ASCII command language. Once the configuration is set up, the module can automatically scan to find an access point, associate, authenticate, and connect over any Wi-Fi network. Additionally, the module can automatically wake up, send data to a remote host and then go back to a low-power sleep state.
Supplied with
USB cable