STMicroelectronics Battery Charger, Energy Harvesting for SPV1050

Nº de Estoque RS: 875-0898Marca: STMicroelectronicsPart Number: STEVAL-ISV019V1
brand-logo

Documentos Técnicos

Especificações

Power Management Function

Battery Charger, Energy Harvesting

Kit Classification

Evaluation Board

Featured Device

SPV1050

Detalhes do produto

SPV1050 ULP Energy Harvester and Battery Charger Evaluation Board, STMicroelectronics

The STEVAL-ISV019V1 is an Evaluation Board based on the SPV1050, an Ultra Low Power (ULP) energy harvester and battery charger with embedded MPPT and LDO (Low Dropout) Regulators.
The evaluation board is working at the best efficiency implementing the MPPT (Maximum Power Point Tracking) DC-DC converter configuration.
It is optimized to harvest energy from Photovoltaic (PV) panels supplying 0.5V to 2.5V and 30μA to 20mA. You can charge a battery with 3.7V under-voltage protection threshold and 4.2V end of charge voltage threshold. Operating flexibility is possible for a different PV panel and battery with a few easy board changes on the application components.

Battery Charging & Monitoring, STMicroelectronics

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 1.320,52

R$ 1.320,52 Each (Sem VAT)

STMicroelectronics Battery Charger, Energy Harvesting for SPV1050

R$ 1.320,52

R$ 1.320,52 Each (Sem VAT)

STMicroelectronics Battery Charger, Energy Harvesting for SPV1050
Informações de estoque temporariamente indisponíveis.

Documentos Técnicos

Especificações

Power Management Function

Battery Charger, Energy Harvesting

Kit Classification

Evaluation Board

Featured Device

SPV1050

Detalhes do produto

SPV1050 ULP Energy Harvester and Battery Charger Evaluation Board, STMicroelectronics

The STEVAL-ISV019V1 is an Evaluation Board based on the SPV1050, an Ultra Low Power (ULP) energy harvester and battery charger with embedded MPPT and LDO (Low Dropout) Regulators.
The evaluation board is working at the best efficiency implementing the MPPT (Maximum Power Point Tracking) DC-DC converter configuration.
It is optimized to harvest energy from Photovoltaic (PV) panels supplying 0.5V to 2.5V and 30μA to 20mA. You can charge a battery with 3.7V under-voltage protection threshold and 4.2V end of charge voltage threshold. Operating flexibility is possible for a different PV panel and battery with a few easy board changes on the application components.

Battery Charging & Monitoring, STMicroelectronics