TE Connectivity Transparent Polyolefin Solder Sleeve 35.5mm Length 4 → 11.5mm Cable Diameter
Documentos Técnicos
Especificações
Brand
TE ConnectivityMinimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Sleeve Length
35.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
2
Colour
Transparent
Shrink Temperature
+85°C
Series
B-155
Standards Met
ANSI J-STD-004, ANSI J-STD-006
País de Origem
Mexico
Detalhes do produto
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 55,22
Each (In a Pack of 25) (Sem VAT)
25
R$ 55,22
Each (In a Pack of 25) (Sem VAT)
25
Comprar em grandes quantidades
| Quantidade | Preço unitário | Per Pacote |
|---|---|---|
| 25 - 350 | R$ 55,22 | R$ 1.380,50 |
| 375 - 1225 | R$ 53,27 | R$ 1.331,75 |
| 1250+ | R$ 51,23 | R$ 1.280,75 |
Documentos Técnicos
Especificações
Brand
TE ConnectivityMinimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Sleeve Length
35.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
2
Colour
Transparent
Shrink Temperature
+85°C
Series
B-155
Standards Met
ANSI J-STD-004, ANSI J-STD-006
País de Origem
Mexico
Detalhes do produto
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.