Documentos Técnicos
Especificações
Brand
Allegro MicrosystemsSensor Type
Hall Effect Sensors
Mounting Type
Through Hole
Magnetic Type
Bipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3 V
Height
3.02mm
Dimensions
4.09 x 1.52 x 3.02mm
Minimum Operating Temperature
-40 °C
Pin Count
3
Maximum Operating Temperature
+150 °C
Package Type
SIP
Typical Magnetic Sensor Hysteresis
45 Gs
Detalhes do produto
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
Hall Effect Sensors, Allegro MicroSystems
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 16,58
Each (In a Pack of 5) (Sem VAT)
5
R$ 16,58
Each (In a Pack of 5) (Sem VAT)
5
Comprar em grandes quantidades
Quantidade | Preço unitário | Per Pacote |
---|---|---|
5 - 20 | R$ 16,58 | R$ 82,90 |
25 - 95 | R$ 13,24 | R$ 66,20 |
100 - 245 | R$ 11,11 | R$ 55,55 |
250 - 495 | R$ 10,02 | R$ 50,10 |
500+ | R$ 9,91 | R$ 49,55 |
Documentos Técnicos
Especificações
Brand
Allegro MicrosystemsSensor Type
Hall Effect Sensors
Mounting Type
Through Hole
Magnetic Type
Bipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3 V
Height
3.02mm
Dimensions
4.09 x 1.52 x 3.02mm
Minimum Operating Temperature
-40 °C
Pin Count
3
Maximum Operating Temperature
+150 °C
Package Type
SIP
Typical Magnetic Sensor Hysteresis
45 Gs
Detalhes do produto
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.