Festo Pneumatic Guided Cylinder - 170864, 40mm Bore, 25mm Stroke, DFM Series, Double Acting
Documentos Técnicos
Especificações
Brand
FestoStroke
25mm
Bore
40mm
Manufacturer Series
DFM
Action
Double
Maximum Operating Pressure
10 bar
Cushioning Type
Elastomer
Model Number p
170864
Model Number (p)
170864
Dimensions
106 x 120 x 54mm
Weight
2.1kg
Maximum Operating Temperature
+80°C
Length
106mm
Height
54mm
Minimum Operating Temperature
-20°C
Width
120mm
País de Origem
Germany
Detalhes do produto
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 8.995,87
Each (Sem VAT)
1
R$ 8.995,87
Each (Sem VAT)
1
Documentos Técnicos
Especificações
Brand
FestoStroke
25mm
Bore
40mm
Manufacturer Series
DFM
Action
Double
Maximum Operating Pressure
10 bar
Cushioning Type
Elastomer
Model Number p
170864
Model Number (p)
170864
Dimensions
106 x 120 x 54mm
Weight
2.1kg
Maximum Operating Temperature
+80°C
Length
106mm
Height
54mm
Minimum Operating Temperature
-20°C
Width
120mm
País de Origem
Germany
Detalhes do produto
DFM Pneumatic Guided Cylinders - Slide Bearing
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications such as clamping, stopping, material handling and lifting. The sturdy and precise aluminium construction is maintenance free and highly resistant to torque and lateral external forces. A compact design incorporates the piston rod as part of the guide body.
The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensors to measure the linear motion of the piston. Air supply ports on both the top and side of the cylinder provide flexible positioning options.