Kopex Enlarger, Conduit Fitting, 20mm Nominal Size, M20 → M25, Brass
Documentos Técnicos
Especificações
Brand
KopexNominal Size
20mm
Fitting Type
Enlarger
Thread Size
M20 → M25
Material
Brass
IP Rating
IP66
Series
EX/E
País de Origem
United Kingdom
Detalhes do produto
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.
Kopex Ex-System
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
5
P.O.A.
5
Documentos Técnicos
Especificações
Brand
KopexNominal Size
20mm
Fitting Type
Enlarger
Thread Size
M20 → M25
Material
Brass
IP Rating
IP66
Series
EX/E
País de Origem
United Kingdom
Detalhes do produto
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.