Documentos Técnicos
Especificações
Number of Channels per Chip
1
Rail to Rail
Rail to Rail Input/Output
Power Supply Type
Single
Pin Count
5
Minimum Operating Temperature
-40 °C
Mounting Type
Surface Mount
Typical Slew Rate
0.5V/µs
Maximum Operating Temperature
+125 °C
Amplifier Type
General Purpose
Typical Gain Bandwidth Product
1MHz
Typical Input Voltage Noise Density
28nV/√Hz
Typical Voltage Gain
110 dB
Typical Single Supply Voltage
1.8 → 6 V
Width
1.8mm
Height
1.3mm
Length
3.1mm
Package Type
SOT-23
Brand
MicrochipDimensions
3.1 x 1.8 x 1.3mm
Detalhes do produto
MINIPRO-TL866A EEPROM/FLASH Programmer
The MINIPRO-TL866A from Seeit is a universal programmer designed for use with over 13000 devices including; EPROMS, EEPROMs, SPI FLASHs, DataFlash and MCUs. A full list of compatible devices can be found on the datasheet.
A Fast SPI algorithm mode enables the MINIPRO-TL866A to provide fast programming. Simply connect the MINIPRO-TL866A to a PC via a USB port. There is no need for an external power supply.
The components are attached directly to the ZIF40 socket or through the HE10 connector (ICSP cable provided).
PC Based Programmers
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 7,43
Each (In a Pack of 10) (Sem VAT)
Padrão
10
R$ 7,43
Each (In a Pack of 10) (Sem VAT)
Padrão
10
Documentos Técnicos
Especificações
Number of Channels per Chip
1
Rail to Rail
Rail to Rail Input/Output
Power Supply Type
Single
Pin Count
5
Minimum Operating Temperature
-40 °C
Mounting Type
Surface Mount
Typical Slew Rate
0.5V/µs
Maximum Operating Temperature
+125 °C
Amplifier Type
General Purpose
Typical Gain Bandwidth Product
1MHz
Typical Input Voltage Noise Density
28nV/√Hz
Typical Voltage Gain
110 dB
Typical Single Supply Voltage
1.8 → 6 V
Width
1.8mm
Height
1.3mm
Length
3.1mm
Package Type
SOT-23
Brand
MicrochipDimensions
3.1 x 1.8 x 1.3mm
Detalhes do produto
MINIPRO-TL866A EEPROM/FLASH Programmer
The MINIPRO-TL866A from Seeit is a universal programmer designed for use with over 13000 devices including; EPROMS, EEPROMs, SPI FLASHs, DataFlash and MCUs. A full list of compatible devices can be found on the datasheet.
A Fast SPI algorithm mode enables the MINIPRO-TL866A to provide fast programming. Simply connect the MINIPRO-TL866A to a PC via a USB port. There is no need for an external power supply.
The components are attached directly to the ZIF40 socket or through the HE10 connector (ICSP cable provided).