MikroElektronika MIKROE-1881, 4x4 RGB Click LED Matrix Display Add On Board With WS2812, MCP1826 LDO regulator

Nº de Estoque RS: 136-0725Marca: MikroElektronikaPart Number: MIKROE-1881Distrelec Article No.: 30154945
brand-logo
Ver tudo em Display Development Tools

Documentos Técnicos

Especificações

Display Technology

LED Matrix Display

Kit Classification

Add On Board

Featured Device

WS2812, MCP1826 LDO regulator

Kit Name

4x4 RGB Click

Classification

Add On Board

Detalhes do produto

4x4 RGB click mikroBUS™

A Click accessory module for use with MikroElektronika mikroBUS microcontroller development boards. The 4x4 RGB click has a matrix of 16 Shenzhen WS2812 RGB LEDs and includes an MCP1826 low dropout voltage regulator. Each WS2812 LED package contains three single coloured LEDs (Red, Green and Blue) and an integrated control chip. The Click board requires a 3.3 or 5V power supply and is connected to the target board microcontroller through the mikroBUS RST pin.

Click mikroBUS™ Display & Graphics Boards

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 491,00

Each (Sem VAT)

MikroElektronika MIKROE-1881, 4x4 RGB Click LED Matrix Display Add On Board With WS2812, MCP1826 LDO regulator

R$ 491,00

Each (Sem VAT)

MikroElektronika MIKROE-1881, 4x4 RGB Click LED Matrix Display Add On Board With WS2812, MCP1826 LDO regulator
Informações de estoque temporariamente indisponíveis.

Documentos Técnicos

Especificações

Display Technology

LED Matrix Display

Kit Classification

Add On Board

Featured Device

WS2812, MCP1826 LDO regulator

Kit Name

4x4 RGB Click

Classification

Add On Board

Detalhes do produto

4x4 RGB click mikroBUS™

A Click accessory module for use with MikroElektronika mikroBUS microcontroller development boards. The 4x4 RGB click has a matrix of 16 Shenzhen WS2812 RGB LEDs and includes an MCP1826 low dropout voltage regulator. Each WS2812 LED package contains three single coloured LEDs (Red, Green and Blue) and an integrated control chip. The Click board requires a 3.3 or 5V power supply and is connected to the target board microcontroller through the mikroBUS RST pin.

Click mikroBUS™ Display & Graphics Boards