Documentos Técnicos
Especificações
Brand
MoflashSupply Voltage
12 → 48 V dc
Light Effect
Flashing, Rotating, Steady
Lens Colour
Amber
Mounting Style
Base Mount
Bulb Type
LED
Current Type
DC
Housing Colour
Red
Lamp Included
Yes
Series
BC 125
Height
90mm
Base Length
125mm
Hazardous Area Certification
ATEX
Minimum Temperature
-40°C
Maximum Temperature
+70°C
Base Width
125mm
País de Origem
France
Detalhes do produto
Explosion Proof Beacon, BC125 Series
The BC125 beacon has been approved for use in potentially explosive atmospheres, hazardous areas and very harsh environmental conditions.
Typical applications are Oil and Gas, On-shore & Offshore, Chemical, Petrochemical, Refineries & Marine locations, etc.
This warning beacon has a choice of two types of light source: either Xenon (strobe) with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings. The design of this beacon allows for termination inside the enclosure.
Approvals
Approved by ATEX and CQST, IMETRO and IECEX
ATEX: II 2G Exd IIC T4 - T6 (incorporating IIA & IIB)
Zones 1 & 2, zones 21 & 22
Standards
Conforms to EN (IEC) 60079-0, EN (IEC) 60079-1 and EN54.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificações
Brand
MoflashSupply Voltage
12 → 48 V dc
Light Effect
Flashing, Rotating, Steady
Lens Colour
Amber
Mounting Style
Base Mount
Bulb Type
LED
Current Type
DC
Housing Colour
Red
Lamp Included
Yes
Series
BC 125
Height
90mm
Base Length
125mm
Hazardous Area Certification
ATEX
Minimum Temperature
-40°C
Maximum Temperature
+70°C
Base Width
125mm
País de Origem
France
Detalhes do produto
Explosion Proof Beacon, BC125 Series
The BC125 beacon has been approved for use in potentially explosive atmospheres, hazardous areas and very harsh environmental conditions.
Typical applications are Oil and Gas, On-shore & Offshore, Chemical, Petrochemical, Refineries & Marine locations, etc.
This warning beacon has a choice of two types of light source: either Xenon (strobe) with multiple flash rate and power ratings or an LED array with three status type indication options and two power ratings. The design of this beacon allows for termination inside the enclosure.
Approvals
Approved by ATEX and CQST, IMETRO and IECEX
ATEX: II 2G Exd IIC T4 - T6 (incorporating IIA & IIB)
Zones 1 & 2, zones 21 & 22
Standards
Conforms to EN (IEC) 60079-0, EN (IEC) 60079-1 and EN54.