Phoenix Contact3036796 P-CO Series Component Terminal Block
Documentos Técnicos
Especificações
Brand
Phoenix ContactColour
Grey
Series
P-CO
Current Rating
6A
Pitch
5.2mm
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
CSA
Model Number
P-CO
País de Origem
Poland
Detalhes do produto
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 71,59
Each (Sem VAT)
1
R$ 71,59
Each (Sem VAT)
1
Comprar em grandes quantidades
| Quantidade | Preço unitário |
|---|---|
| 1 - 9 | R$ 71,59 |
| 10 - 24 | R$ 68,62 |
| 25+ | R$ 66,64 |
Documentos Técnicos
Especificações
Brand
Phoenix ContactColour
Grey
Series
P-CO
Current Rating
6A
Pitch
5.2mm
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
CSA
Model Number
P-CO
País de Origem
Poland
Detalhes do produto
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².