1025 piece Plain Stainless Steel Metric Cotter Pin Kit A2 304
Documentos Técnicos
Especificações
Brand
RS ProPin Type
Cotter
System of Measurement
Metric
Number of Pieces
1025
Material
Stainless Steel
Stainless Steel Type
A2 304
Finish
Plain
Diameter Largest
4mm
Diameter Smallest
1.6mm
Length Longest
50mm
Length Shortest
25mm
País de Origem
Italy
Detalhes do produto
RS PRO Stainless Steel Split Cotter Pin Kit
RS PRO metric cotter pin kit contains 1025-piece of pins, made of A2 grade stainless steel with plain finish. Each cotter pin conforms to DIN94 standards. These pins are a type of mechanical fastener that can hold assemblies together and are easy to install and remove and offer a reliable fastening solution for light-duty applications.
Cotter pins (also known as a split pins or cotter key) are metal fasteners that are bent during installation to lock it in place. Typically made of thick wire with a half-circular cross section, split pins come in multiple sizes and types. Cotter pins are a flat metal that is open on one end and folded to a small eyelet at the opposite end. The open end of the pin is bent apart, locking it in place when inserted into hole. When removed they are designed to be discarded and replaced, because of fatigue from bending.
Standards
Conforms to DIN94
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 2.635,49
1 Kit of 1 (Sem VAT)
1
R$ 2.635,49
1 Kit of 1 (Sem VAT)
1
Documentos Técnicos
Especificações
Brand
RS ProPin Type
Cotter
System of Measurement
Metric
Number of Pieces
1025
Material
Stainless Steel
Stainless Steel Type
A2 304
Finish
Plain
Diameter Largest
4mm
Diameter Smallest
1.6mm
Length Longest
50mm
Length Shortest
25mm
País de Origem
Italy
Detalhes do produto
RS PRO Stainless Steel Split Cotter Pin Kit
RS PRO metric cotter pin kit contains 1025-piece of pins, made of A2 grade stainless steel with plain finish. Each cotter pin conforms to DIN94 standards. These pins are a type of mechanical fastener that can hold assemblies together and are easy to install and remove and offer a reliable fastening solution for light-duty applications.
Cotter pins (also known as a split pins or cotter key) are metal fasteners that are bent during installation to lock it in place. Typically made of thick wire with a half-circular cross section, split pins come in multiple sizes and types. Cotter pins are a flat metal that is open on one end and folded to a small eyelet at the opposite end. The open end of the pin is bent apart, locking it in place when inserted into hole. When removed they are designed to be discarded and replaced, because of fatigue from bending.
Standards
Conforms to DIN94