RS PRO Non Contact Voltage Indicator, 230V ac to 1000V ac With RS Calibration

Nº de Estoque RS: 141-1997Marca: RS PRO
brand-logo
Ver tudo em Campos Indicadores Magnéticos e Voltagem sem Contato

Documentos Técnicos

Especificações

Brand

RS Pro

Indicator Type

Voltage

Battery Type

AAA

Calibrated

RSCAL

ATEX Approval

Yes

Power Source

Battery

Safety Category

CAT III 1000 V ac

Weight

50g

Diameter

18mm

Length

151mm

Maximum Detection Voltage

1000V ac

Minimum Detection Voltage

230V ac

Maximum Operating Temperature

+40°C

Minimum Operating Temperature

-20°C

Safety Category Level

CAT III

Safety Category Voltage

1000V ac

País de Origem

Denmark

Detalhes do produto

RS Pro Volt Stick Non-Contact Voltage Detector

The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable.

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

P.O.A.

RS PRO Non Contact Voltage Indicator, 230V ac to 1000V ac With RS Calibration

Calibration type

RS Calibration

Calibration

No Calibration

R$ 1.365,53

RS Calibration

Calibrated before despatch to traceable to national standards

P.O.A.

1

Disponível em múltiplos de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

RS PRO Non Contact Voltage Indicator, 230V ac to 1000V ac With RS Calibration
Informações de estoque temporariamente indisponíveis.

Calibration type

RS Calibration

Calibration

No Calibration

R$ 1.365,53

RS Calibration

Calibrated before despatch to traceable to national standards

P.O.A.

1

Disponível em múltiplos de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Documentos Técnicos

Especificações

Brand

RS Pro

Indicator Type

Voltage

Battery Type

AAA

Calibrated

RSCAL

ATEX Approval

Yes

Power Source

Battery

Safety Category

CAT III 1000 V ac

Weight

50g

Diameter

18mm

Length

151mm

Maximum Detection Voltage

1000V ac

Minimum Detection Voltage

230V ac

Maximum Operating Temperature

+40°C

Minimum Operating Temperature

-20°C

Safety Category Level

CAT III

Safety Category Voltage

1000V ac

País de Origem

Denmark

Detalhes do produto

RS Pro Volt Stick Non-Contact Voltage Detector

The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable.