RS PRO Piston Inline Flow Switch for Liquid, 0.1 L/min Min, 0.6 L/min Max

Nº de Estoque RS: 510-0565Marca: RS PRO
brand-logo
Ver tudo em Flow Sensors

Documentos Técnicos

Especificações

Brand

RS Pro

Media Monitored

Liquid

Device Type

Piston Inline

Minimum Flow Rate

0.1 L/min

Maximum Flow Rate

0.6 L/min

Supply Voltage

200 V ac

Pipe Diameter Range

1/4 in

Connection Type

1/4 BSP

Maximum Pressure

300bar

Material

Brass

Maximum Media Temperature

+100°C

Maximum Operating Temperature

+120°C

Current Rating

1 A

País de Origem

Germany

Detalhes do produto

Piston Flow Switch

Monitoring of low flow rates of liquids. A piston equipped with a magnet is displaced by the flow, this action is proportional to the flow rate against a supporting spring. A reed switch on the outside is positioned at the desired point within the control range. A signal is generated when the actual flow rate value is above or below the set value.

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 6.286,25

Each (Sem VAT)

RS PRO Piston Inline Flow Switch for Liquid, 0.1 L/min Min, 0.6 L/min Max

R$ 6.286,25

Each (Sem VAT)

RS PRO Piston Inline Flow Switch for Liquid, 0.1 L/min Min, 0.6 L/min Max
Informações de estoque temporariamente indisponíveis.

Documentos Técnicos

Especificações

Brand

RS Pro

Media Monitored

Liquid

Device Type

Piston Inline

Minimum Flow Rate

0.1 L/min

Maximum Flow Rate

0.6 L/min

Supply Voltage

200 V ac

Pipe Diameter Range

1/4 in

Connection Type

1/4 BSP

Maximum Pressure

300bar

Material

Brass

Maximum Media Temperature

+100°C

Maximum Operating Temperature

+120°C

Current Rating

1 A

País de Origem

Germany

Detalhes do produto

Piston Flow Switch

Monitoring of low flow rates of liquids. A piston equipped with a magnet is displaced by the flow, this action is proportional to the flow rate against a supporting spring. A reed switch on the outside is positioned at the desired point within the control range. A signal is generated when the actual flow rate value is above or below the set value.