HARTING, D-Sub Standard Series, Male Crimp D-sub Connector Contact, PdNi Pin, 24 → 20 AWG
Documentos Técnicos
Especificações
Brand
HartingGender
Male
Contact Material
Brass
Wire Size
24 → 20 AWG
Termination Method
Crimp
Contact Plating
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Maximum Wire Size AWG
20AWG
Minimum Wire Size AWG
24AWG
País de Origem
Germany
Detalhes do produto
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807
R$ 2.200,00
R$ 4,40 Each (On a Reel of 500) (Sem VAT)
500
R$ 2.200,00
R$ 4,40 Each (On a Reel of 500) (Sem VAT)
500
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
| Quantidade | Preço unitário | Per Bobina |
|---|---|---|
| 500 - 1000 | R$ 4,40 | R$ 2.200,00 |
| 1500 - 2500 | R$ 4,04 | R$ 2.020,00 |
| 3000 - 4500 | R$ 4,02 | R$ 2.010,00 |
| 5000+ | R$ 4,00 | R$ 2.000,00 |
Documentos Técnicos
Especificações
Brand
HartingGender
Male
Contact Material
Brass
Wire Size
24 → 20 AWG
Termination Method
Crimp
Contact Plating
PdNi
Contact Type
Pin
Maximum Contact Resistance
≤10MΩ
Minimum Wire Size mm²
0.25mm²
Maximum Wire Size mm²
0.56mm²
Series
D-Sub Standard
Current Rating
6.5A
Length
14.48mm
Maximum Wire Size AWG
20AWG
Minimum Wire Size AWG
24AWG
País de Origem
Germany
Detalhes do produto
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Standards
IEC 60 807