Kubler K07 Counter, 7 Digit, 10Hz, 24 V dc

Nº de Estoque RS: 656-5935Marca: KublerPart Number: 1.139.200.418
brand-logo
Ver tudo em Cantoneiras

Documentos Técnicos

Especificações

Brand

Kübler

Supply Voltage

24 V dc

Count Mode

Impulses

Function

Counter

Input Type

Voltage

Connection Type

Solder Pin

Reset Method

No Reset

Number Of Digits

7

Mounting Type

Panel Mount

Count Direction

Up

Digit Height

4 mm

Maximum Count Frequency

10Hz

Minimum Operating Temperature

-10°C

Series

K07

Maximum Operating Temperature

+85°C

País de Origem

Germany

Detalhes do produto

Type K07 - micro cumulative counter, 7-digit, front panel mounting

PCB, Surface & DIN Rail Mounting

All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.

Você pode estar interessado em
Informações de estoque temporariamente indisponíveis.

R$ 617,16

R$ 617,16 Each (Sem VAT)

Kubler K07 Counter, 7 Digit, 10Hz, 24 V dc

R$ 617,16

R$ 617,16 Each (Sem VAT)

Kubler K07 Counter, 7 Digit, 10Hz, 24 V dc
Informações de estoque temporariamente indisponíveis.

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Você pode estar interessado em

Documentos Técnicos

Especificações

Brand

Kübler

Supply Voltage

24 V dc

Count Mode

Impulses

Function

Counter

Input Type

Voltage

Connection Type

Solder Pin

Reset Method

No Reset

Number Of Digits

7

Mounting Type

Panel Mount

Count Direction

Up

Digit Height

4 mm

Maximum Count Frequency

10Hz

Minimum Operating Temperature

-10°C

Series

K07

Maximum Operating Temperature

+85°C

País de Origem

Germany

Detalhes do produto

Type K07 - micro cumulative counter, 7-digit, front panel mounting

PCB, Surface & DIN Rail Mounting

All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.

Você pode estar interessado em