Track Roller Track Roller LFR50/5-6-2Z-HLC, 5mm ID, 17mm OD
Documentos Técnicos
Especificações
Brand
INARoller Diameter
17mm
Roller Length
8mm
Type
Track Roller
Bore Size
5mm
Static Load Rating
900N
Dynamic Load Rating
1630N
Material
Steel
Detalhes do produto
Single and Double Row Yoke Type Track Rollers
INA from Schaeffler ball bearing track rollers are self-retaining, single or double row ball bearings with particularly thick-walled outer rings. In addition to high radial forces, these bearings can also support axial forces in both directions.
The outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where they are inclined in relation to the mating track and edge stresses must be avoided.
Yoke type track rollers have outer rings with a crowned or cylindrical outside surface, inner rings and ball and cage assemblies with plastic cages. They are similar in construction to deep groove or angular contact ball bearings and are mounted on shafts or studs.
INA
R$ 620,62
R$ 620,62 Each (Sem VAT)
1
R$ 620,62
R$ 620,62 Each (Sem VAT)
1
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
| Quantidade | Preço unitário |
|---|---|
| 1 - 4 | R$ 620,62 |
| 5 - 9 | R$ 604,87 |
| 10 - 24 | R$ 601,20 |
| 25+ | R$ 597,40 |
Documentos Técnicos
Especificações
Brand
INARoller Diameter
17mm
Roller Length
8mm
Type
Track Roller
Bore Size
5mm
Static Load Rating
900N
Dynamic Load Rating
1630N
Material
Steel
Detalhes do produto
Single and Double Row Yoke Type Track Rollers
INA from Schaeffler ball bearing track rollers are self-retaining, single or double row ball bearings with particularly thick-walled outer rings. In addition to high radial forces, these bearings can also support axial forces in both directions.
The outer rings have a crowned or cylindrical outside surface. Designs with a crowned outside surface are used where they are inclined in relation to the mating track and edge stresses must be avoided.
Yoke type track rollers have outer rings with a crowned or cylindrical outside surface, inner rings and ball and cage assemblies with plastic cages. They are similar in construction to deep groove or angular contact ball bearings and are mounted on shafts or studs.