Documentos Técnicos
Especificações
DC Holdover Voltage
135V
Minimum Operating Temperature
-55°C
DC Spark Over Voltage
350V
Maximum Operating Temperature
+105°C
Maximum Surge Current
10A
Impulse Spark Over Voltage
875V
Mounting Type
Surface Mount
Suppressor Type
2 Electrode Gas Discharge Tube
Capacitance
1pF
Length
7.9mm
Depth
6mm
Height
7.5mm
Brand
BournsDimensions
7.9 x 6 x 7.5mm
Series
2029
País de Origem
Costa Rica
Detalhes do produto
Optek Magnetic Hall Effect Sensor
Range of hallogic hall-effect sensors from Optek are designed for use within non-contact switching operations. The hall-effect sensors comprise of an integrated monolithic circuit with hall element, linear amplifier & Schmitt trigger all on a single silicone chip.
Thanks to this robust design, this range of hall-effect sensors operate with excellent temperature stability in more demanding environments.
The Optek hallogic hall-effect sensors allow for direct driving more than 7 TTL loads. Also supports standard logic family for power supplies ranging from 4.5 V to 24 V, with switching frequencies from DC to 200 kHz.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
500
P.O.A.
500
Documentos Técnicos
Especificações
DC Holdover Voltage
135V
Minimum Operating Temperature
-55°C
DC Spark Over Voltage
350V
Maximum Operating Temperature
+105°C
Maximum Surge Current
10A
Impulse Spark Over Voltage
875V
Mounting Type
Surface Mount
Suppressor Type
2 Electrode Gas Discharge Tube
Capacitance
1pF
Length
7.9mm
Depth
6mm
Height
7.5mm
Brand
BournsDimensions
7.9 x 6 x 7.5mm
Series
2029
País de Origem
Costa Rica
Detalhes do produto
Optek Magnetic Hall Effect Sensor
Range of hallogic hall-effect sensors from Optek are designed for use within non-contact switching operations. The hall-effect sensors comprise of an integrated monolithic circuit with hall element, linear amplifier & Schmitt trigger all on a single silicone chip.
Thanks to this robust design, this range of hall-effect sensors operate with excellent temperature stability in more demanding environments.
The Optek hallogic hall-effect sensors allow for direct driving more than 7 TTL loads. Also supports standard logic family for power supplies ranging from 4.5 V to 24 V, with switching frequencies from DC to 200 kHz.