Entrelec1SNA115685R1200 SNA Series DIN Rail Terminal Block, 6mm², Single-Level, Screw Termination

Nº de Estoque RS: 303-6428Marca: EntrelecPart Number: 1SNA115685R1200
brand-logo
Ver tudo em DIN Rail Terminal Blocks

Documentos Técnicos

Especificações

Colour

Grey

Number of Levels

Single

Series

SNA

Termination Method

Screw

Cable CSA

6mm²

Current Rating

41A

Voltage Rating

800 V ac

Pitch

8mm

Minimum Operating Temperature

-5°C

Maximum Operating Temperature

+40°C

País de Origem

France

Detalhes do produto

Spring Loaded Terminal (Feedthrough and Test)

Screw compression clamp terminals incorporating a spring under each wire clamp, giving high vibration resistance and also meets requirements of ESI 50//18. Each termination will accept two hook bladed crimp terminals, one locating on the current bar behind the screw clamp, the other on the underside of the clamp. For use with Top Hat DIN rails,2 and 4 pole sliding bridges are available for use with current transformer test terminal (stock no. 383-1403)

Você pode estar interessado em
RS PRO DIN Rail Terminal Block, 6mm², Screw Termination
R$ 24,20Each (In a Pack of 5) (Sem VAT)

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 74,94

Each (Sem VAT)

Entrelec1SNA115685R1200 SNA Series DIN Rail Terminal Block, 6mm², Single-Level, Screw Termination

R$ 74,94

Each (Sem VAT)

Entrelec1SNA115685R1200 SNA Series DIN Rail Terminal Block, 6mm², Single-Level, Screw Termination
Informações de estoque temporariamente indisponíveis.
Você pode estar interessado em
RS PRO DIN Rail Terminal Block, 6mm², Screw Termination
R$ 24,20Each (In a Pack of 5) (Sem VAT)

Documentos Técnicos

Especificações

Colour

Grey

Number of Levels

Single

Series

SNA

Termination Method

Screw

Cable CSA

6mm²

Current Rating

41A

Voltage Rating

800 V ac

Pitch

8mm

Minimum Operating Temperature

-5°C

Maximum Operating Temperature

+40°C

País de Origem

France

Detalhes do produto

Spring Loaded Terminal (Feedthrough and Test)

Screw compression clamp terminals incorporating a spring under each wire clamp, giving high vibration resistance and also meets requirements of ESI 50//18. Each termination will accept two hook bladed crimp terminals, one locating on the current bar behind the screw clamp, the other on the underside of the clamp. For use with Top Hat DIN rails,2 and 4 pole sliding bridges are available for use with current transformer test terminal (stock no. 383-1403)

Você pode estar interessado em
RS PRO DIN Rail Terminal Block, 6mm², Screw Termination
R$ 24,20Each (In a Pack of 5) (Sem VAT)