Documentos Técnicos
Especificações
Brand
LegrisConnector A
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Maximum Operating Temperature
+80°C
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Tube Connection B - Type
Push In
Connector B
Push In 10 mm
País de Origem
France
Detalhes do produto
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 209,87
Each (In a Pack of 2) (Sem VAT)
2
R$ 209,87
Each (In a Pack of 2) (Sem VAT)
2
Comprar em grandes quantidades
Quantidade | Preço unitário | Per Pacote |
---|---|---|
2 - 8 | R$ 209,87 | R$ 419,74 |
10 - 18 | R$ 206,69 | R$ 413,38 |
20+ | R$ 203,02 | R$ 406,04 |
Documentos Técnicos
Especificações
Brand
LegrisConnector A
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Maximum Operating Temperature
+80°C
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Tube Connection B - Type
Push In
Connector B
Push In 10 mm
País de Origem
France
Detalhes do produto
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.