Documentos Técnicos
Especificações
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 35V ac
Power Rating
300VA
Number of Outputs
2
Secondary Current
4.29A
Height
65mm
Weight
2.5kg
Diameter
125mm
Dimensions
147.1 (Dia.) x 64.7mm
Minimum Operating Frequency
48Hz
Maximum Operating Frequency
60Hz
Termination Type
Leads
Fixing Hole Diameter
M6
Maximum Temperature
+40°C
País de Origem
Czech Republic
Detalhes do produto
Encapsulated with Leads 230Vac Primary Transformers
High quality encapsulated toroidal transformers with a single 230Vac 50/60Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently. Designed for easy mounting with centre hole fixing.
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL94-V0
Toroidal Encapsulated 230Vac Primary 15VA to 500VA
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 3.113,05
Each (Sem VAT)
1
R$ 3.113,05
Each (Sem VAT)
1
Comprar em grandes quantidades
Quantidade | Preço unitário |
---|---|
1 - 9 | R$ 3.113,05 |
10 - 24 | R$ 2.987,23 |
25 - 49 | R$ 2.711,58 |
50 - 74 | R$ 2.426,29 |
75+ | R$ 2.131,46 |
Documentos Técnicos
Especificações
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 35V ac
Power Rating
300VA
Number of Outputs
2
Secondary Current
4.29A
Height
65mm
Weight
2.5kg
Diameter
125mm
Dimensions
147.1 (Dia.) x 64.7mm
Minimum Operating Frequency
48Hz
Maximum Operating Frequency
60Hz
Termination Type
Leads
Fixing Hole Diameter
M6
Maximum Temperature
+40°C
País de Origem
Czech Republic
Detalhes do produto
Encapsulated with Leads 230Vac Primary Transformers
High quality encapsulated toroidal transformers with a single 230Vac 50/60Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently. Designed for easy mounting with centre hole fixing.
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL94-V0