Documentos Técnicos
Especificações
Backlighting
Yes
Number of Ports
6
Display Colour
Grey
Product Range
Sysmac HMI
Maximum Operating Temperature
+50°C
Display Size
7 in
IP Rating
IP65
Minimum Operating Temperature
0°C
Display Type
TFT LCD
Port Type
1 x Serial, 1 x USB Slave, 2 x Ethernet, 2 x USB Host
Supply Voltage
24 V dc
Depth
69mm
Width
236mm
Length
165mm
Brand
OmronPartial Bearing Code
51305
Dimensions
236 x 165 x 69 mm
País de Origem
Netherlands
Detalhes do produto
Immersion Cartridge Heaters
This design of heater allows the stainless steel sheath to be immersed directly in to semi solids or liquids up to the thread mounting bush. The heater is constructed from 316 Stainless steel which has a welded end cap and threaded, tapered, mounting bush.
Warning
For safety reasons, it is recommended that the heater block/body is bonded to earth.The heater must not be immersed in to any liquid above the mounting bush as the flying lead termination is not sealed.
Approvals
UL & CSA
Cartridge Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 45.420,38
Each (Sem VAT)
1
R$ 45.420,38
Each (Sem VAT)
1
Documentos Técnicos
Especificações
Backlighting
Yes
Number of Ports
6
Display Colour
Grey
Product Range
Sysmac HMI
Maximum Operating Temperature
+50°C
Display Size
7 in
IP Rating
IP65
Minimum Operating Temperature
0°C
Display Type
TFT LCD
Port Type
1 x Serial, 1 x USB Slave, 2 x Ethernet, 2 x USB Host
Supply Voltage
24 V dc
Depth
69mm
Width
236mm
Length
165mm
Brand
OmronPartial Bearing Code
51305
Dimensions
236 x 165 x 69 mm
País de Origem
Netherlands
Detalhes do produto
Immersion Cartridge Heaters
This design of heater allows the stainless steel sheath to be immersed directly in to semi solids or liquids up to the thread mounting bush. The heater is constructed from 316 Stainless steel which has a welded end cap and threaded, tapered, mounting bush.
Warning
For safety reasons, it is recommended that the heater block/body is bonded to earth.The heater must not be immersed in to any liquid above the mounting bush as the flying lead termination is not sealed.
Approvals
UL & CSA
Cartridge Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.