Documentos Técnicos
Especificações
Taper Type
Linear
Number of Pots per Package
1
Memory Type
Non-Volatile
Number of Positions
100
Control Interface
Serial-3 Wire
Resistance Value
50kΩ
Power Supply Type
Single
Maximum Operating Temperature
+70 °C
Pin Count
8
Minimum Operating Temperature
0 °C
Mounting Type
Through Hole
Height
3.3mm
Width
6.35mm
Length
9.56mm
Typical Single Supply Voltage
5 V
Package Type
PDIP
Brand
Renesas ElectronicsDimensions
9.56 x 6.35 x 3.3mm
País de Origem
Thailand
Detalhes do produto
PEL103 Power Energy Logger (Unit Only)
The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.
Supplied with
4 measurement leads (straight banana, 3 m long, black)
4 crocodile clips (black)
1 SD card (2 GB)
1 set of rings and inserts (for ends of leads and current sensors)
1 mains cable
1 USB cable (Type A, Type B)
1 Multifix mounting systems
1 operating manual (on CD)
1 bag
1 safety datasheet
PEL Transfer PC software
1 quick start-up guide
SD Card to USB adapter
Standards
IEC 61010 600 V CAT IV – 1,000 V CAT III
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
50
P.O.A.
50
Documentos Técnicos
Especificações
Taper Type
Linear
Number of Pots per Package
1
Memory Type
Non-Volatile
Number of Positions
100
Control Interface
Serial-3 Wire
Resistance Value
50kΩ
Power Supply Type
Single
Maximum Operating Temperature
+70 °C
Pin Count
8
Minimum Operating Temperature
0 °C
Mounting Type
Through Hole
Height
3.3mm
Width
6.35mm
Length
9.56mm
Typical Single Supply Voltage
5 V
Package Type
PDIP
Brand
Renesas ElectronicsDimensions
9.56 x 6.35 x 3.3mm
País de Origem
Thailand
Detalhes do produto
PEL103 Power Energy Logger (Unit Only)
The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.
Supplied with
4 measurement leads (straight banana, 3 m long, black)
4 crocodile clips (black)
1 SD card (2 GB)
1 set of rings and inserts (for ends of leads and current sensors)
1 mains cable
1 USB cable (Type A, Type B)
1 Multifix mounting systems
1 operating manual (on CD)
1 bag
1 safety datasheet
PEL Transfer PC software
1 quick start-up guide
SD Card to USB adapter
Standards
IEC 61010 600 V CAT IV – 1,000 V CAT III