RS PRO PT100 RTD Detector, 1.5mm Dia, 15mm Long, 2 Wire, Probe, Class A +650°C Max

Nº de Estoque RS: 397-1595Marca: RS PRO
brand-logo
Ver tudo em RTD Sensors

Documentos Técnicos

Especificações

Brand

RS Pro

Sensor Type

PT100

Probe Length

15mm

Probe Diameter

1.5mm

Minimum Temperature Sensed

-200°C

Maximum Temperature Sensed

+650°C

Termination Type

Solder

Probe Material

Ceramic

Process Connection

Probe

Number Of Wires

2

Accuracy

Class A

Response Time

0.4 s

País de Origem

United Kingdom

Detalhes do produto

Duplex PT100 Wire Wound Detector

Twin-element Duplex detector utilising two pure platinum wires wound into a miniature spiral and located within axial holes in a high purity alumina rod. The high stability Duplex sensor can be connected to the measuring or control device with two wires for the source and two for measurement, reducing the effects of long leads on the accuracy of measurement. The detector should ideally be housed within a protective metal tube.

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 532,78

Each (Sem VAT)

RS PRO PT100 RTD Detector, 1.5mm Dia, 15mm Long, 2 Wire, Probe, Class A +650°C Max

R$ 532,78

Each (Sem VAT)

RS PRO PT100 RTD Detector, 1.5mm Dia, 15mm Long, 2 Wire, Probe, Class A +650°C Max
Informações de estoque temporariamente indisponíveis.

Comprar em grandes quantidades

QuantidadePreço unitário
1 - 5R$ 532,78
6 - 11R$ 520,37
12+R$ 508,40

Documentos Técnicos

Especificações

Brand

RS Pro

Sensor Type

PT100

Probe Length

15mm

Probe Diameter

1.5mm

Minimum Temperature Sensed

-200°C

Maximum Temperature Sensed

+650°C

Termination Type

Solder

Probe Material

Ceramic

Process Connection

Probe

Number Of Wires

2

Accuracy

Class A

Response Time

0.4 s

País de Origem

United Kingdom

Detalhes do produto

Duplex PT100 Wire Wound Detector

Twin-element Duplex detector utilising two pure platinum wires wound into a miniature spiral and located within axial holes in a high purity alumina rod. The high stability Duplex sensor can be connected to the measuring or control device with two wires for the source and two for measurement, reducing the effects of long leads on the accuracy of measurement. The detector should ideally be housed within a protective metal tube.