Documentos Técnicos
Especificações
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
VFQFPN
Maximum Operating Supply Voltage
52 V
Pin Count
48
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Minimum Operating Temperature
-25 °C
Maximum Operating Temperature
+125 °C
Length
7.15mm
Height
0.95mm
Width
7.15mm
Dimensions
7.15 x 7.15 x 0.95mm
Detalhes do produto
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.
Motor Controllers & Drivers, STMicroelectronics
R$ 145,66
R$ 72,83 Each (In a Pack of 2) (Sem VAT)
Padrão
2
R$ 145,66
R$ 72,83 Each (In a Pack of 2) (Sem VAT)
Padrão
2
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
Quantidade | Preço unitário | Per Pacote |
---|---|---|
2 - 8 | R$ 72,83 | R$ 145,66 |
10 - 18 | R$ 70,21 | R$ 140,42 |
20 - 48 | R$ 64,14 | R$ 128,28 |
50 - 98 | R$ 58,72 | R$ 117,44 |
100+ | R$ 56,51 | R$ 113,02 |
Documentos Técnicos
Especificações
Brand
STMicroelectronicsMotor Type
Brushed DC
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
2.8A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
VFQFPN
Maximum Operating Supply Voltage
52 V
Pin Count
48
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Minimum Operating Temperature
-25 °C
Maximum Operating Temperature
+125 °C
Length
7.15mm
Height
0.95mm
Width
7.15mm
Dimensions
7.15 x 7.15 x 0.95mm
Detalhes do produto
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.