Documentos Técnicos
Especificações
Brand
VishayPeak Average Forward Current
1.5A
Bridge Type
Single Phase
Peak Reverse Repetitive Voltage
100V
Mounting Type
Through Hole
Package Type
WOG
Pin Count
4
Configuration
Single
Peak Non-Repetitive Forward Surge Current
50A
Maximum Operating Temperature
+150 °C
Minimum Operating Temperature
-55 °C
Peak Forward Voltage
1V
Peak Reverse Current
5µA
Length
9.86mm
Dimensions
9.86 x 8.84 x 5.6mm
Height
5.6mm
Width
8.84mm
Detalhes do produto
Vishay WxxG Series Bridge Rectifier
Approvals
UL approved, E54214
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 11,64
Each (In a Pack of 20) (Sem VAT)
Padrão
20
R$ 11,64
Each (In a Pack of 20) (Sem VAT)
Padrão
20
Comprar em grandes quantidades
Quantidade | Preço unitário | Per Pacote |
---|---|---|
20 - 180 | R$ 11,64 | R$ 232,80 |
200 - 480 | R$ 9,10 | R$ 182,00 |
500 - 980 | R$ 8,40 | R$ 168,00 |
1000 - 1980 | R$ 7,44 | R$ 148,80 |
2000+ | R$ 5,94 | R$ 118,80 |
Documentos Técnicos
Especificações
Brand
VishayPeak Average Forward Current
1.5A
Bridge Type
Single Phase
Peak Reverse Repetitive Voltage
100V
Mounting Type
Through Hole
Package Type
WOG
Pin Count
4
Configuration
Single
Peak Non-Repetitive Forward Surge Current
50A
Maximum Operating Temperature
+150 °C
Minimum Operating Temperature
-55 °C
Peak Forward Voltage
1V
Peak Reverse Current
5µA
Length
9.86mm
Dimensions
9.86 x 8.84 x 5.6mm
Height
5.6mm
Width
8.84mm
Detalhes do produto
Vishay WxxG Series Bridge Rectifier
Approvals
UL approved, E54214
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.