ABB Safety Controller

Nº de Estoque RS: 733-4824Marca: ABBPart Number: 2TLA020070R2000 IDFIX-RDistrelec Article No.: 30410110
brand-logo
Ver tudo em Safety Automation Controllers

Documentos Técnicos

Especificações

Brand

ABB

Accessory Type

Identifier

For Use With

Pluto Safety Controller

Detalhes do produto

Pluto Safety PLC, Base Unit

Pluto from ABB is an "All-Master" safety PLC concept, which simplifies the design of safety systems and achieves the highest safety category 4 according to EN 954-1. All Pluto's are Master units and can see the other Pluto's inputs, outputs and global memories. This enables the Pluto to evaluate the information from the other Pluto's and then take decisions concerning its own safety devices. The Gateway units are available for several different bus systems, i.e. Profibus (733-4836), CanOpen (733-4830), Devicenet (733-4849) and Ethernet (733-4842). Of Pluto's inputs (the smallest unit has 16 I/O), thus can be configured as either inputs or outputs. In the Pluto family by ABB most modules have dual safety outputs - potential free or PNP types. In a two-wire bus system up to 32 Pluto units can be safely connected and communicate with a superior system via a Gateway or HMI displays. Therefore within a maximum extended system 1472 I/O's can be connected. Also all input components may be connected in series for even more complexity and optimisation.

Approvals

TUV, FS, CSA

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 423,82

Each (Sem VAT)

ABB Safety Controller

R$ 423,82

Each (Sem VAT)

ABB Safety Controller
Informações de estoque temporariamente indisponíveis.

Comprar em grandes quantidades

QuantidadePreço unitário
1 - 4R$ 423,82
5 - 9R$ 408,94
10 - 24R$ 393,18
25 - 49R$ 377,22
50+R$ 359,89

Documentos Técnicos

Especificações

Brand

ABB

Accessory Type

Identifier

For Use With

Pluto Safety Controller

Detalhes do produto

Pluto Safety PLC, Base Unit

Pluto from ABB is an "All-Master" safety PLC concept, which simplifies the design of safety systems and achieves the highest safety category 4 according to EN 954-1. All Pluto's are Master units and can see the other Pluto's inputs, outputs and global memories. This enables the Pluto to evaluate the information from the other Pluto's and then take decisions concerning its own safety devices. The Gateway units are available for several different bus systems, i.e. Profibus (733-4836), CanOpen (733-4830), Devicenet (733-4849) and Ethernet (733-4842). Of Pluto's inputs (the smallest unit has 16 I/O), thus can be configured as either inputs or outputs. In the Pluto family by ABB most modules have dual safety outputs - potential free or PNP types. In a two-wire bus system up to 32 Pluto units can be safely connected and communicate with a superior system via a Gateway or HMI displays. Therefore within a maximum extended system 1472 I/O's can be connected. Also all input components may be connected in series for even more complexity and optimisation.

Approvals

TUV, FS, CSA