Analog Devices TruPwr ADL5511 RF Envelope, RMS Detector Evaluation Board 6GHz ADL5511-EVALZ

Nº de Estoque RS: 785-8617Marca: Analog DevicesPart Number: ADL5511-EVALZ
brand-logo

Documentos Técnicos

Especificações

RF Technology

RF Envelope, RMS Detector

Kit Classification

Evaluation Board

Featured Device

ADL5511

Frequency

6GHz

Kit Name

TruPwr

Detalhes do produto

Evaluation Board for ADL5511 DC to 6GHz Envelope and TruPwr RMS Detector

The ADL5511-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. For normal operation, it requires a 5V/100mA power supply. The 5V power supply should be connected to the clip leads labeled VPOS and GND. The RF input signals are applied to an edge-mounted SMA type RF connector (RFIN). The envelope output signal is accessible via the SMA connector labeled VENV. The RMS output and envelope reference signals are accessible on the clip leads labeled VRMA and EREF. To access the RMS output and envelope reference output via SMA cables, SMA connectors can be soldered on to the pads labeled VRMS1 and EREF1.

RF & Microwave, Analog Devices

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 4.738,20

Each (Sem VAT)

Analog Devices TruPwr ADL5511 RF Envelope, RMS Detector Evaluation Board 6GHz ADL5511-EVALZ

R$ 4.738,20

Each (Sem VAT)

Analog Devices TruPwr ADL5511 RF Envelope, RMS Detector Evaluation Board 6GHz ADL5511-EVALZ
Informações de estoque temporariamente indisponíveis.

Documentos Técnicos

Especificações

RF Technology

RF Envelope, RMS Detector

Kit Classification

Evaluation Board

Featured Device

ADL5511

Frequency

6GHz

Kit Name

TruPwr

Detalhes do produto

Evaluation Board for ADL5511 DC to 6GHz Envelope and TruPwr RMS Detector

The ADL5511-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. For normal operation, it requires a 5V/100mA power supply. The 5V power supply should be connected to the clip leads labeled VPOS and GND. The RF input signals are applied to an edge-mounted SMA type RF connector (RFIN). The envelope output signal is accessible via the SMA connector labeled VENV. The RMS output and envelope reference signals are accessible on the clip leads labeled VRMA and EREF. To access the RMS output and envelope reference output via SMA cables, SMA connectors can be soldered on to the pads labeled VRMS1 and EREF1.

RF & Microwave, Analog Devices