Documentos Técnicos
Especificações
Brand
Analog DevicesRegulator Type
Charge Pump
Maximum Output Current
150mA
Output Voltage
3.3 V
Mounting Type
Surface Mount
Package Type
DFN
Pin Count
6
Maximum Switching Frequency
1.8 MHz
Dimensions
2 x 2 x 0.7mm
Maximum Operating Temperature
+85 °C
Height
0.7mm
Minimum Operating Temperature
-40 °C
Length
2mm
Width
2mm
País de Origem
United States
Detalhes do produto
Inductorless (Charge Pump) DC/DC Converters, Linear Technology
Switching Voltage Regulators, Linear Technology
Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.
The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, forward, Isolated, Inverting and flyback controllers. The Flyback, Forward and Isolated Controllers primary and secondary side provide a solution to help replace the DC/DC bricks that get used in back-plane power conversion.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
500
P.O.A.
500
Documentos Técnicos
Especificações
Brand
Analog DevicesRegulator Type
Charge Pump
Maximum Output Current
150mA
Output Voltage
3.3 V
Mounting Type
Surface Mount
Package Type
DFN
Pin Count
6
Maximum Switching Frequency
1.8 MHz
Dimensions
2 x 2 x 0.7mm
Maximum Operating Temperature
+85 °C
Height
0.7mm
Minimum Operating Temperature
-40 °C
Length
2mm
Width
2mm
País de Origem
United States
Detalhes do produto
Inductorless (Charge Pump) DC/DC Converters, Linear Technology
Switching Voltage Regulators, Linear Technology
Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.
The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, forward, Isolated, Inverting and flyback controllers. The Flyback, Forward and Isolated Controllers primary and secondary side provide a solution to help replace the DC/DC bricks that get used in back-plane power conversion.