EMERSON – ASCO Solenoid Valve SCG356B466VMS.24/DC, 3 port(s) , NC, 24 V dc, 1/4in
Documentos Técnicos
Especificações
Brand
EMERSON – ASCOSupply Voltage
24 V dc
Number of Ports
3
Connection Size
1/4in
Connection
1/4 in G Female
Operation
Direct
Default Valve Position
NC
Suitable Applications
Air, Inert Gas, Oil, Water
Type
3/2
Orifice Diameter
1.6mm
Body Material
Brass
Series
356
Maximum Working Pressure
10 bar
Operating Temperature Range
-10 → +100 °C
Thread Standard or Connection Type
G
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+100°C
Connection Gender
Female
Maximum Closing Time
10ms
Flow Factor Kv
0.08m³/h
Maximum Opening Time
10ms
País de Origem
France
Detalhes do produto
Direct control 3//2 solenoid valves, series 356
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificações
Brand
EMERSON – ASCOSupply Voltage
24 V dc
Number of Ports
3
Connection Size
1/4in
Connection
1/4 in G Female
Operation
Direct
Default Valve Position
NC
Suitable Applications
Air, Inert Gas, Oil, Water
Type
3/2
Orifice Diameter
1.6mm
Body Material
Brass
Series
356
Maximum Working Pressure
10 bar
Operating Temperature Range
-10 → +100 °C
Thread Standard or Connection Type
G
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+100°C
Connection Gender
Female
Maximum Closing Time
10ms
Flow Factor Kv
0.08m³/h
Maximum Opening Time
10ms
País de Origem
France
Detalhes do produto
Direct control 3//2 solenoid valves, series 356
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.