Assemtech SPST-NO PCB Reed Switch 500 mA 180 V
Documentos Técnicos
Especificações
Brand
AssemtechProduct Type
Reed Switch
Contact Configuration
SPST-NO
Maximum Switching Current
500mA
Maximum Switching Power
10W
Maximum Switching Voltage
180V
Contact Resistance
115mΩ
Contact Material
Ruthenium on Gold
Maximum Release Time
30μs
Operating Time Including Bounce
0.25ms
AT Value Range
10 to 20 AT
Terminal Type
Wire
Mount Type
PCB
Minimum Operating Temperature
-55°C
Width
1.8 mm
Maximum Operating Temperature
125°C
Length
13.5mm
Standards/Approvals
ISO
Series
RI
País de Origem
Netherlands
Detalhes do produto
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA
Informações de estoque temporariamente indisponíveis.
R$ 346,40
R$ 34,64 Each (In a Bag of 10) (Sem VAT)
10
R$ 346,40
R$ 34,64 Each (In a Bag of 10) (Sem VAT)
Informações de estoque temporariamente indisponíveis.
10
Documentos Técnicos
Especificações
Brand
AssemtechProduct Type
Reed Switch
Contact Configuration
SPST-NO
Maximum Switching Current
500mA
Maximum Switching Power
10W
Maximum Switching Voltage
180V
Contact Resistance
115mΩ
Contact Material
Ruthenium on Gold
Maximum Release Time
30μs
Operating Time Including Bounce
0.25ms
AT Value Range
10 to 20 AT
Terminal Type
Wire
Mount Type
PCB
Minimum Operating Temperature
-55°C
Width
1.8 mm
Maximum Operating Temperature
125°C
Length
13.5mm
Standards/Approvals
ISO
Series
RI
País de Origem
Netherlands
Detalhes do produto
Form A & C Reed Switches
These dry-reed switches have been hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
There is a wide selection to choose from. You can select different lengths and each length has various sensitivity options.
Approvals
UL, CSA