Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
Documentos Técnicos
Especificações
Brand
BroadcomProduct Type
Isolation Amplifier
Minimum Supply Voltage
4.5V
Maximum Supply Voltage
5.5V
Number of Channels
1
Mount Type
Through Hole, Surface
Package Type
DIP-8
Pin Count
8
Minimum Operating Temperature
-40°C
Vos - Input Offset Voltage
0.3 mV
CMRR - Common Mode Rejection Ratio
76dB
Isolation Voltage
3750Vrms
Maximum Operating Temperature
100°C
Width
7.62 mm
Height
1.78mm
Length
9.8mm
Standards/Approvals
IEC/EN/DIN EN 60747-5-2, CSA, UL 1577
Series
HCPL-7800
Automotive Standard
No
Detalhes do produto
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Informações de estoque temporariamente indisponíveis.
R$ 5.936,00
R$ 118,72 Each (In a Tube of 50) (Sem VAT)
50
R$ 5.936,00
R$ 118,72 Each (In a Tube of 50) (Sem VAT)
Informações de estoque temporariamente indisponíveis.
50
| Quantidade | Preço unitário | Per Tubo |
|---|---|---|
| 50 - 200 | R$ 118,72 | R$ 5.936,00 |
| 250 - 450 | R$ 104,51 | R$ 5.225,50 |
| 500+ | R$ 93,61 | R$ 4.680,50 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Documentos Técnicos
Especificações
Brand
BroadcomProduct Type
Isolation Amplifier
Minimum Supply Voltage
4.5V
Maximum Supply Voltage
5.5V
Number of Channels
1
Mount Type
Through Hole, Surface
Package Type
DIP-8
Pin Count
8
Minimum Operating Temperature
-40°C
Vos - Input Offset Voltage
0.3 mV
CMRR - Common Mode Rejection Ratio
76dB
Isolation Voltage
3750Vrms
Maximum Operating Temperature
100°C
Width
7.62 mm
Height
1.78mm
Length
9.8mm
Standards/Approvals
IEC/EN/DIN EN 60747-5-2, CSA, UL 1577
Series
HCPL-7800
Automotive Standard
No
Detalhes do produto
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products