Documentos Técnicos
Especificações
Brand
CrouzetMonitoring Application
Phase, Voltage
Voltage Sensing Range
183 → 528V ac
Contact Configuration
SP-NO/NC
Voltage Sensitivity
Undervoltage
Phase Sensitivity
Phase Failure, Phase Sequence
Time Delay
0.1 → 10s
Dimensions
69 x 17.5 x 92.6mm
Maximum Voltage Sensed
528V ac
Height
92.6mm
Length
69mm
Minimum Voltage Sensed
183V ac
Operating Temperature Range
-20 → +50°C
Minimum Operating Temperature
-20°C
Width
17.5mm
Maximum Operating Temperature
+50°C
País de Origem
France
Detalhes do produto
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificações
Brand
CrouzetMonitoring Application
Phase, Voltage
Voltage Sensing Range
183 → 528V ac
Contact Configuration
SP-NO/NC
Voltage Sensitivity
Undervoltage
Phase Sensitivity
Phase Failure, Phase Sequence
Time Delay
0.1 → 10s
Dimensions
69 x 17.5 x 92.6mm
Maximum Voltage Sensed
528V ac
Height
92.6mm
Length
69mm
Minimum Voltage Sensed
183V ac
Operating Temperature Range
-20 → +50°C
Minimum Operating Temperature
-20°C
Width
17.5mm
Maximum Operating Temperature
+50°C
País de Origem
France
Detalhes do produto
Multi Function Phase Control Relays 17.5mm - C-Lynx
3 phase network control relays monitor: the correct sequence of phases L1, L2, L3, the total phase failure - Undervoltage and overvoltage from 2% to 20% of Under Voltage Relay and Asymmetry rate from 5% to 15% of Under Voltage Relay. LEDs are used for fault signalling, if a fault persists for longer than the threshold crossing delay configured by the operator, the output relay opens and the LED R is extinguished.