EnOcean USB 300 Module 868MHz

Nº de Estoque RS: 179-1182Marca: EnOceanPart Number: USB 300
brand-logo
Ver tudo em RF Modules

Documentos Técnicos

Especificações

Brand

EnOcean

Component Type

Module

Supported Frequency Bands

868MHz

Maximum RF Data Rate

125kbit/s

Supported Bus Interfaces

UART, USB

Dimensions

66 x 23 x 9mm

Height

9mm

Length

66mm

Maximum Operating Temperature

+40 °C

Minimum Operating Temperature

0 °C

Width

23mm

País de Origem

Hungary

Detalhes do produto

USB Gateway Transceiver Module USB 300

USB 300 is a small USB stick which connects PCs and smart home servers to EnOcean wireless products. USB 300 is equipped with the TCM 310 transceiver gateway board and provides a bi-directional interface between an EnOcean ISM-band wireless channel and a USB serial bus. Radio messages are sent and received via an externally connected USB host. The USB 300 also provides signal strength information. Additional control commands can be sent from the host to USB 300, e.g. to configure repeater functionality.

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 910,96

Each (In a Tray of 100) (Sem VAT)

EnOcean USB 300 Module 868MHz

R$ 910,96

Each (In a Tray of 100) (Sem VAT)

EnOcean USB 300 Module 868MHz
Informações de estoque temporariamente indisponíveis.

Documentos Técnicos

Especificações

Brand

EnOcean

Component Type

Module

Supported Frequency Bands

868MHz

Maximum RF Data Rate

125kbit/s

Supported Bus Interfaces

UART, USB

Dimensions

66 x 23 x 9mm

Height

9mm

Length

66mm

Maximum Operating Temperature

+40 °C

Minimum Operating Temperature

0 °C

Width

23mm

País de Origem

Hungary

Detalhes do produto

USB Gateway Transceiver Module USB 300

USB 300 is a small USB stick which connects PCs and smart home servers to EnOcean wireless products. USB 300 is equipped with the TCM 310 transceiver gateway board and provides a bi-directional interface between an EnOcean ISM-band wireless channel and a USB serial bus. Radio messages are sent and received via an externally connected USB host. The USB 300 also provides signal strength information. Additional control commands can be sent from the host to USB 300, e.g. to configure repeater functionality.