Documentos Técnicos
Especificações
Brand
EntrelecColour
Green, Yellow
Number of Levels
Single
Series
ZK4
Termination Method
Spring Clamp
Cable CSA
4mm²
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+110°C
País de Origem
France
Detalhes do produto
ZK4 PI-Spring Feed-Through Terminal Blocks
ZK4 PI-Spring feed-through Terminal Blocks combine high performance with compact dimensions. The terminals are also the best for marking, with an up-front flat marker zone. This feature lets you mark up to eight digits or increase the font size.
SNK Series PI-Spring Terminal Blocks
PI-Spring technology provides a Smart Connection and the benefits of 2 technologies in 1 connection:
1. 50% faster connection time with Push-In mode (direct insertion - for stranded wire with ferrule or for solid wire, use screwdriver to remove wire).
2. Reduced effort and conductor preparation time with Spring-Mode (use screwdriver to insert and remove non-prepared stranded wires).
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 136,49
Each (In a Pack of 5) (Sem VAT)
5
R$ 136,49
Each (In a Pack of 5) (Sem VAT)
5
Comprar em grandes quantidades
Quantidade | Preço unitário | Per Pacote |
---|---|---|
5 - 25 | R$ 136,49 | R$ 682,45 |
30 - 55 | R$ 134,53 | R$ 672,65 |
60+ | R$ 133,14 | R$ 665,70 |
Documentos Técnicos
Especificações
Brand
EntrelecColour
Green, Yellow
Number of Levels
Single
Series
ZK4
Termination Method
Spring Clamp
Cable CSA
4mm²
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+110°C
País de Origem
France
Detalhes do produto
ZK4 PI-Spring Feed-Through Terminal Blocks
ZK4 PI-Spring feed-through Terminal Blocks combine high performance with compact dimensions. The terminals are also the best for marking, with an up-front flat marker zone. This feature lets you mark up to eight digits or increase the font size.
SNK Series PI-Spring Terminal Blocks
PI-Spring technology provides a Smart Connection and the benefits of 2 technologies in 1 connection:
1. 50% faster connection time with Push-In mode (direct insertion - for stranded wire with ferrule or for solid wire, use screwdriver to remove wire).
2. Reduced effort and conductor preparation time with Spring-Mode (use screwdriver to insert and remove non-prepared stranded wires).