Documentos Técnicos
Especificações
Brand
ERNIBackplane Connector Type
Hard Metric Type B
Gender
Male
Number Of Contacts
95
Number of Columns
19
Number Of Rows
7
Body Orientation
Vertical
Housing Material
PBT
Pitch
2mm
Contact Material
Phosphor Bronze
Contact Plating
Gold
Current Rating
1.5A
Termination Method
Press Fit
Series
ERmet
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Detalhes do produto
ERNI ERmet 2.0 mm Hard Metric Male Connectors
ERmet 2.0 mm Hard Metric male connectors with a high density modular design supported by international connector standards IEC 61076-4-101. These ERmet 2.0 mm HM male connectors can support various PCB arrangements including backplane, board to board and mezzanine applications. The signal pins of these headers have 3 lengths allowing 3 levels of sequential mating in 1.5 mm increments for front or rear hot swappable applications. The contacts of these ERmet 2.0 mm HM backplane connectors have a long 2.5 mm wipe length that ensures reliable mating even in adverse conditions. These ERmet 2.0 mm HM male connectors are available with optional shielding contact rows for optimum performance. Versions are also available with location pegs for improved rigidity and polarisation on the PCB. The press fit terminations of these ERmet 2.0 mm HM backplane header connectors enable simple and secure PCB mounting. These ERmet 2.0 mm Hard Metric male connectors are available in Type A, B & C configurations and various modular widths.
Stock number 917-5251 has a type B8, stage (Hot Swap) configuration with M2 keying and a PXI slot type
ERNI ERmet 2.0 mm Hard Metric Connector System
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 198,32
Each (Sem VAT)
1
R$ 198,32
Each (Sem VAT)
1
Comprar em grandes quantidades
Quantidade | Preço unitário |
---|---|
1 - 99 | R$ 198,32 |
100 - 249 | R$ 160,98 |
250 - 499 | R$ 153,47 |
500 - 999 | R$ 145,60 |
1000+ | R$ 136,34 |
Documentos Técnicos
Especificações
Brand
ERNIBackplane Connector Type
Hard Metric Type B
Gender
Male
Number Of Contacts
95
Number of Columns
19
Number Of Rows
7
Body Orientation
Vertical
Housing Material
PBT
Pitch
2mm
Contact Material
Phosphor Bronze
Contact Plating
Gold
Current Rating
1.5A
Termination Method
Press Fit
Series
ERmet
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Detalhes do produto
ERNI ERmet 2.0 mm Hard Metric Male Connectors
ERmet 2.0 mm Hard Metric male connectors with a high density modular design supported by international connector standards IEC 61076-4-101. These ERmet 2.0 mm HM male connectors can support various PCB arrangements including backplane, board to board and mezzanine applications. The signal pins of these headers have 3 lengths allowing 3 levels of sequential mating in 1.5 mm increments for front or rear hot swappable applications. The contacts of these ERmet 2.0 mm HM backplane connectors have a long 2.5 mm wipe length that ensures reliable mating even in adverse conditions. These ERmet 2.0 mm HM male connectors are available with optional shielding contact rows for optimum performance. Versions are also available with location pegs for improved rigidity and polarisation on the PCB. The press fit terminations of these ERmet 2.0 mm HM backplane header connectors enable simple and secure PCB mounting. These ERmet 2.0 mm Hard Metric male connectors are available in Type A, B & C configurations and various modular widths.
Stock number 917-5251 has a type B8, stage (Hot Swap) configuration with M2 keying and a PXI slot type