Ewellix Makers in Motion LBCR 5-2LS, Bearing with 12mm Outside Diameter
Documentos Técnicos
Especificações
Inside Diameter
5mm
Outside Diameter
12mm
Length
22mm
Linear Bearing Type
Linear Ball Bearing
Linear Ball Bearing Type
Closed
Seals
Without Seals
Dynamic Load Rating
280N
Static Load Rating
210N
País de Origem
Germany
Detalhes do produto
LBCR Ball Bushings - Closed
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 1.113,77
Each (Sem VAT)
1
R$ 1.113,77
Each (Sem VAT)
1
Comprar em grandes quantidades
| Quantidade | Preço unitário |
|---|---|
| 1 - 4 | R$ 1.113,77 |
| 5 - 9 | R$ 1.085,82 |
| 10+ | R$ 1.078,97 |
Documentos Técnicos
Especificações
Inside Diameter
5mm
Outside Diameter
12mm
Length
22mm
Linear Bearing Type
Linear Ball Bearing
Linear Ball Bearing Type
Closed
Seals
Without Seals
Dynamic Load Rating
280N
Static Load Rating
210N
País de Origem
Germany
Detalhes do produto
LBCR Ball Bushings - Closed
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.