Fluke -720RTD Pressure Calibrator, For Use With 719 Pro Pressure Calibrator, 721 Pressure Calibrator

Nº de Estoque RS: 796-1646Marca: FlukePart Number: Fluke -720RTD
brand-logo

Documentos Técnicos

Especificações

Brand

Fluke

Accessory Type

RTD Temperature Probe

For Use With

719 Pro Pressure Calibrator, 721 Pressure Calibrator

País de Origem

Denmark

Detalhes do produto

Fluke RTD Temperature Probe 720RTD

The Fluke-720RTD temperature probe is for use with Fluke 721 precision pressure calibrators and Fluke 719Pro electric pressure calibrators. The 720RTD has a 10 inch (254mm) insertion depth with inch (6.3mm) diameter stainless steel sheath. If a Fluke 721 precision pressure calibrator is used with the Fluke 720RTD probe then it is not necessary to set the probe type. The user simply connects probe to calibrator and configures the display to read Temperature. The display shows 'OL' when the measured temperature is outside the nominal measurement range of the RTD function (below -40°C or above 150°C).

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 10.018,45

Each (Sem VAT)

Fluke -720RTD Pressure Calibrator, For Use With 719 Pro Pressure Calibrator, 721 Pressure Calibrator

R$ 10.018,45

Each (Sem VAT)

Fluke -720RTD Pressure Calibrator, For Use With 719 Pro Pressure Calibrator, 721 Pressure Calibrator
Informações de estoque temporariamente indisponíveis.

Documentos Técnicos

Especificações

Brand

Fluke

Accessory Type

RTD Temperature Probe

For Use With

719 Pro Pressure Calibrator, 721 Pressure Calibrator

País de Origem

Denmark

Detalhes do produto

Fluke RTD Temperature Probe 720RTD

The Fluke-720RTD temperature probe is for use with Fluke 721 precision pressure calibrators and Fluke 719Pro electric pressure calibrators. The 720RTD has a 10 inch (254mm) insertion depth with inch (6.3mm) diameter stainless steel sheath. If a Fluke 721 precision pressure calibrator is used with the Fluke 720RTD probe then it is not necessary to set the probe type. The user simply connects probe to calibrator and configures the display to read Temperature. The display shows 'OL' when the measured temperature is outside the nominal measurement range of the RTD function (below -40°C or above 150°C).