Honeywell Roller Plunger Limit Switch, NO/NC, SPDT, Die Cast Aluminium Housing, 480V ac Max, 480 V ac 20 A, 125 V dc
Documentos Técnicos
Especificações
Brand
HoneywellActuator Type
Roller Plunger
Pole and Throw Configuration
SPDT
Normal State Configuration
NO/NC
Maximum Current
480 V ac 20 A, 125 V dc 500mA
Housing Material
Die Cast Aluminium
Maximum AC Voltage
480V
Maximum DC Voltage
125V
Connection Type
1/2 in NPT
Action Type
Snap Action
Length
101.6mm
Minimum Operating Temperature
-32°C
Depth
33mm
Width
124.7mm
Maximum Operating Temperature
+71°C
Mounting Orientation
Vertical
País de Origem
United States
Detalhes do produto
BAF Medium Duty Limit Switches
The BAF limit switch series from Honeywell is designed for use within a medium duty environment. The elastomer boot on sealed actuator verions protects the actuating mechanism and the internal basic switch from contaminants. There is a seal gasket between the cover plate and the enclosures on all versions. The cover plate is removed for ease of wiring and switch replacement without demounting the switch. The actuator position is designated "right" or "left," when looking at the nameplate.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificações
Brand
HoneywellActuator Type
Roller Plunger
Pole and Throw Configuration
SPDT
Normal State Configuration
NO/NC
Maximum Current
480 V ac 20 A, 125 V dc 500mA
Housing Material
Die Cast Aluminium
Maximum AC Voltage
480V
Maximum DC Voltage
125V
Connection Type
1/2 in NPT
Action Type
Snap Action
Length
101.6mm
Minimum Operating Temperature
-32°C
Depth
33mm
Width
124.7mm
Maximum Operating Temperature
+71°C
Mounting Orientation
Vertical
País de Origem
United States
Detalhes do produto
BAF Medium Duty Limit Switches
The BAF limit switch series from Honeywell is designed for use within a medium duty environment. The elastomer boot on sealed actuator verions protects the actuating mechanism and the internal basic switch from contaminants. There is a seal gasket between the cover plate and the enclosures on all versions. The cover plate is removed for ease of wiring and switch replacement without demounting the switch. The actuator position is designated "right" or "left," when looking at the nameplate.