INA SL045010-PP 50mm I.D Cylindrical Roller Bearing, 80mm O.D
Documentos Técnicos
Especificações
Brand
INAInside Diameter
50mm
Outside Diameter
80mm
Roller Bearing Type
Cylindrical
Race Width
40mm
Bore Type
Parallel
Material
Steel
Static Load Rating
151000N
Number of Rows
2
Dynamic Load Rating
102000N
End Type
Sealed
Limiting Speed
2600rpm
Fatigue Limit Load
22100N
Maximum Speed - Grease
2600rpm
Detalhes do produto
Double Row Full Complement Cylindrical Roller Bearings
INA from Schaeffler bearings have solid outer and inner rings and rib-guided cylindrical rollers. Since these bearings have the largest possible number of rolling elements, they have high radial load carrying capacity, high rigidity and are suitable for compact designs. Due to the kinematic conditions, however, they do not achieve the high speeds that are possible when using cylindrical roller bearings with cage.
Cable sheave bearings (cylindrical roller bearings with snap ring grooves) are locating bearings. These bearings are rigid and can support moderate axial forces in both directions and high radial forces. They consist of solid outer and inner rings with ribs, rib-guided cylindrical rollers and sealing rings.
The outer rings have snap ring grooves for retaining rings. The inner rings are axially split, 1 mm wider than the outer rings and held together by a rolled-in steel strip.
INA
R$ 4.900,56
R$ 4.900,56 Each (Sem VAT)
1
R$ 4.900,56
R$ 4.900,56 Each (Sem VAT)
1
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
Documentos Técnicos
Especificações
Brand
INAInside Diameter
50mm
Outside Diameter
80mm
Roller Bearing Type
Cylindrical
Race Width
40mm
Bore Type
Parallel
Material
Steel
Static Load Rating
151000N
Number of Rows
2
Dynamic Load Rating
102000N
End Type
Sealed
Limiting Speed
2600rpm
Fatigue Limit Load
22100N
Maximum Speed - Grease
2600rpm
Detalhes do produto
Double Row Full Complement Cylindrical Roller Bearings
INA from Schaeffler bearings have solid outer and inner rings and rib-guided cylindrical rollers. Since these bearings have the largest possible number of rolling elements, they have high radial load carrying capacity, high rigidity and are suitable for compact designs. Due to the kinematic conditions, however, they do not achieve the high speeds that are possible when using cylindrical roller bearings with cage.
Cable sheave bearings (cylindrical roller bearings with snap ring grooves) are locating bearings. These bearings are rigid and can support moderate axial forces in both directions and high radial forces. They consist of solid outer and inner rings with ribs, rib-guided cylindrical rollers and sealing rings.
The outer rings have snap ring grooves for retaining rings. The inner rings are axially split, 1 mm wider than the outer rings and held together by a rolled-in steel strip.