KTR, 75 mm OD, 48 mm Length Coupler, Polyamide
Documentos Técnicos
Especificações
Brand
KTRProduct Type
Coupler
Outside Diameter
75 mm
Length
48mm
Material
Polyamide
Series
BoWex
Standards/Approvals
EC directive 94/9/EC dated March 23, ATEX, 1994
País de Origem
Germany
Detalhes do produto
BoWex M Tooth Gear Coupling Sleeve
BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear.
The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance.
Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise.
BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools.
The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production.
Informações de estoque temporariamente indisponíveis.
R$ 620,41
R$ 620,41 Each (Sem VAT)
1
R$ 620,41
R$ 620,41 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 4 | R$ 620,41 |
| 5 - 9 | R$ 605,56 |
| 10 - 24 | R$ 601,21 |
| 25+ | R$ 597,12 |
Documentos Técnicos
Especificações
Brand
KTRProduct Type
Coupler
Outside Diameter
75 mm
Length
48mm
Material
Polyamide
Series
BoWex
Standards/Approvals
EC directive 94/9/EC dated March 23, ATEX, 1994
País de Origem
Germany
Detalhes do produto
BoWex M Tooth Gear Coupling Sleeve
BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements are avoided so that BoWex® couplings are almost free from wear.
The material combination of steel hubs and polyamide sleeves allows for maintenance free continuous operation with low friction on the teeth. While any metallic materials tend to "corrode" in case of dry running, slide combinations with polyamide and steel are operative without any lubrication or maintenance.
Due to the double cardanic operation of BoWex® couplings, restoring forces can be neglected in case of angular and radial displacements. Periodic fluctuations in angular velocity do not arise.
BoWex® couplings can be assembled both vertically or horizontally with no need for any special assembly tools.
The smooth and hard surface plus the high thermal stability and resistance to lubricants, fuels, hydraulic fluids, dissolvents, and so on, make polyamide an ideal material for components stressed by sliding, particularly for the coupling production.