Legris LF3000 Series Tee Threaded Adaptor, Push In 10 mm to Push In 10 mm, Threaded-to-Tube Connection Style
Documentos Técnicos
Especificações
Brand
LegrisConnector A
Push In 10 mm
Connector B
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Tube Connection B - Type
Push In
País de Origem
France
Detalhes do produto
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.
Threaded Tube Adaptors, Elbows and Tees
R$ 485,90
R$ 242,95 Each (In a Pack of 2) (Sem VAT)
2
R$ 485,90
R$ 242,95 Each (In a Pack of 2) (Sem VAT)
2
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
| Quantidade | Preço unitário | Per Pacote |
|---|---|---|
| 2 - 8 | R$ 242,95 | R$ 485,90 |
| 10 - 18 | R$ 238,97 | R$ 477,94 |
| 20+ | R$ 234,92 | R$ 469,84 |
Documentos Técnicos
Especificações
Brand
LegrisConnector A
Push In 10 mm
Connector B
Push In 10 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Tube Connection B - Type
Push In
País de Origem
France
Detalhes do produto
Stud Run Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3103 fittings allow the connection of two plastic pneumatic tubes at 90 degrees to a singlek threaded port.