Documentos Técnicos
Especificações
Brand
LegrisConnector A
Push In 8 mm
Connector B
Push In 8 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Tube Connection B - Type
Push In
País de Origem
France
Detalhes do produto
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.
Threaded Tube Adaptors, Elbows and Tees
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 145,94
Each (In a Pack of 5) (Sem VAT)
5
R$ 145,94
Each (In a Pack of 5) (Sem VAT)
5
Comprar em grandes quantidades
Quantidade | Preço unitário | Per Pacote |
---|---|---|
5 - 20 | R$ 145,94 | R$ 729,70 |
25 - 45 | R$ 143,48 | R$ 717,40 |
50+ | R$ 141,07 | R$ 705,35 |
Documentos Técnicos
Especificações
Brand
LegrisConnector A
Push In 8 mm
Connector B
Push In 8 mm
Pneumatic Fitting Type
Tee Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/4 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Maximum Operating Pressure
20 bar
Body Material
Glass Reinforced Nylon
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Tube Connection B - Type
Push In
País de Origem
France
Detalhes do produto
Stud Branch Tee Adaptor - Male Taper & Parallel Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
For the connection of 2 tubes at a 90° angle to a threaded port.