Legris LF3000 Series Elbow Threaded Adaptor, R 1/2 Male to Push In 16 mm, Threaded-to-Tube Connection Style
Documentos Técnicos
Especificações
Brand
LegrisConnector A
R 1/2 Male
Connector B
Push In 16 mm
Pneumatic Fitting Type
Elbow Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/2 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Angle
90°
Maximum Operating Pressure
20 bar
Swivel Connection
Yes
Body Material
Plastic
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Mounting Type
Inline
Standards Met
EC/42/2006
País de Origem
France
Detalhes do produto
Stud Elbow Adaptor - Male Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space.
Threaded Tube Adaptors, Elbows and Tees
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 355,75
Each (In a Pack of 5) (Sem VAT)
5
R$ 355,75
Each (In a Pack of 5) (Sem VAT)
5
Documentos Técnicos
Especificações
Brand
LegrisConnector A
R 1/2 Male
Connector B
Push In 16 mm
Pneumatic Fitting Type
Elbow Threaded Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
R 1/2 Male
Manufacturer Series
LF3000
Thread Material
Nickel Plated Brass
Angle
90°
Maximum Operating Pressure
20 bar
Swivel Connection
Yes
Body Material
Plastic
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Mounting Type
Inline
Standards Met
EC/42/2006
País de Origem
France
Detalhes do produto
Stud Elbow Adaptor - Male Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
3109 fittings are for the connection of tubing at 90° with a male thread. They can be tightened using a flat spanner or an Allen key if the installation is short on space.