McLennan Servo Supplies Unipolar Hybrid Stepper Motor 1.8°, 0.52Nm, 2 A, 8 Wires

Nº de Estoque RS: 432-8289Marca: McLennan Servo SuppliesPart Number: 23HS-104 MK2
brand-logo
Ver tudo em DC Motors

Documentos Técnicos

Especificações

Shaft Diameter

6.35mm

Current Rating

2 A

Step Angle

1.8°

País de Origem

Italy

Detalhes do produto

Size 23 Hybrid Motor

0.9° and 1.8° Hybrid Stepper Motors

1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:

Você pode estar interessado em

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

P.O.A.

McLennan Servo Supplies Unipolar Hybrid Stepper Motor 1.8°, 0.52Nm, 2 A, 8 Wires

P.O.A.

McLennan Servo Supplies Unipolar Hybrid Stepper Motor 1.8°, 0.52Nm, 2 A, 8 Wires
Informações de estoque temporariamente indisponíveis.
Você pode estar interessado em

Documentos Técnicos

Especificações

Shaft Diameter

6.35mm

Current Rating

2 A

Step Angle

1.8°

País de Origem

Italy

Detalhes do produto

Size 23 Hybrid Motor

0.9° and 1.8° Hybrid Stepper Motors

1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:

Você pode estar interessado em