Documentos Técnicos
Especificações
Brand
MicrochipMemory Size
8kB
Product Type
Serial EEPROM
Interface Type
Serial-SPI
Package Type
SOIC
Mount Type
Surface
Pin Count
8
Maximum Clock Frequency
3MHz
Organisation
1K x 8 bit
Minimum Supply Voltage
2.5V
Maximum Supply Voltage
5.5V
Number of Bits per Word
8
Minimum Operating Temperature
0°C
Maximum Operating Temperature
70°C
Width
6 mm
Length
4.9mm
Standards/Approvals
No
Automotive Standard
No
Data Retention
200year
Supply Current
1mA
Maximum Random Access Time
230ns
Detalhes do produto
25AA080/25C080/25LC080 SPI Serial EEPROM
Microchips 25AA080/25C080/25LC080 family of devices are 8 Kbit SPI Serial EEPROMs available in a variety of package, temperature and power supply variants.
The Serial Peripheral Interface (SPI) is utilised to provide the required Clock Input (SCK), Data In (SI) and Data Out (SO) signals. The operation of these devices can be paused via a Hold pin (HOLD) which causes inputs to be ignored with the exception higher priority interrupts defined via the Chip Select (CS) pin.
EEPROM Serial Access - Microchip
Informações de estoque temporariamente indisponíveis.
P.O.A.
Each (Supplied in a Tube) (Sem VAT)
Embalagem de Produção (Tubo)
5
P.O.A.
Each (Supplied in a Tube) (Sem VAT)
Informações de estoque temporariamente indisponíveis.
Embalagem de Produção (Tubo)
5
Documentos Técnicos
Especificações
Brand
MicrochipMemory Size
8kB
Product Type
Serial EEPROM
Interface Type
Serial-SPI
Package Type
SOIC
Mount Type
Surface
Pin Count
8
Maximum Clock Frequency
3MHz
Organisation
1K x 8 bit
Minimum Supply Voltage
2.5V
Maximum Supply Voltage
5.5V
Number of Bits per Word
8
Minimum Operating Temperature
0°C
Maximum Operating Temperature
70°C
Width
6 mm
Length
4.9mm
Standards/Approvals
No
Automotive Standard
No
Data Retention
200year
Supply Current
1mA
Maximum Random Access Time
230ns
Detalhes do produto
25AA080/25C080/25LC080 SPI Serial EEPROM
Microchips 25AA080/25C080/25LC080 family of devices are 8 Kbit SPI Serial EEPROMs available in a variety of package, temperature and power supply variants.
The Serial Peripheral Interface (SPI) is utilised to provide the required Clock Input (SCK), Data In (SI) and Data Out (SO) signals. The operation of these devices can be paused via a Hold pin (HOLD) which causes inputs to be ignored with the exception higher priority interrupts defined via the Chip Select (CS) pin.
